Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 2 : paso 1, imagen 2 de 2
    • Power off the device before disassembly.

    • Remove the single 8mm Phillips #1 screw just beneath the lock symbol on the bottom of the laptop.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 2 : paso 2, imagen 2 de 2
    • Use your screwdriver to shift the tab to the left, towards to Optical Drive.

    • Push the tab to the left until the Optical drive is protruding from the side of the laptop.

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 2 : paso 3, imagen 2 de 2
    • Pull the Optical Drive firmly out from its slot to remove it from the laptop.

Linea de Meta

Una persona más ha completado esta guía.

Nathan Valm

Miembro Desde 03/20/18

735 Reputación

5 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 10

Todo El Tiempo: 171