1. Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1]. Pry the base cover from the edge [2].
    • Loosen the M2.5x2+3.5 captive screws that secure the base cover to the computer [1].

    • Pry the base cover from the edge [2].

    • Lift the base cover away from the computer

  2. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  3. Disconnect the battery cable from the connector on the system board [1]. Remove the M2x3L screws that secure the battery to the computer [2].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the M2x3L screws that secure the battery to the computer [2].

  4. Pry the clips securing the memory module until the memory pops-up [1]
    • Pry the clips securing the memory module until the memory pops-up [1]

    • Lift the memory module away from the connector [2].

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Johnathan Hammond

Miembro Desde 28/02/18

35,756 Reputación

408 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

15 Miembros

925 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 5

Todo El Tiempo: 85