Partes

No se requieren partes.

  1. Remove the screws that secure the back cover to the computer
    • Remove the screws that secure the back cover to the computer

  2. Using a scribe, pry the edges of the back cover from all sides [1].
    • Using a scribe, pry the edges of the back cover from all sides [1].

    • Lift the back cover from the computer [2].

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Disconnect the battery cable from the connector on the system board [1].
    • Disconnect the battery cable from the connector on the system board [1].

    • Remove the screws that secure the battery to the computer [2].

    • Lift and remove the battery from the computer [3].

  5. Lift the tab to disconnect the hard drive cable from the connector on the system board [1] .
    • Lift the tab to disconnect the hard drive cable from the connector on the system board [1] .

    • Remove the screws that secure the hard drive to the computer [2].

    • Lift the hard drive from the computer [3].

Conclusión

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Miembro Desde 28/02/18

35,756 Reputación

408 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

15 Miembros

925 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 11

Últimos 30 Días: 44

Todo El Tiempo: 349