Saltar al contenido principal

Partes

No se especificaron partes.

  1. Take screw covers off with a metal spudger
    • Take screw covers off with a metal spudger

  2. Take the six screws out with the bit driver.
    • Take the six screws out with the bit driver.

  3. Pop the black plastic panel off with the metal spudger. There are three spots where you should leverage it so that the panel does not break. Pop the black plastic panel off with the metal spudger. There are three spots where you should leverage it so that the panel does not break.
    • Pop the black plastic panel off with the metal spudger. There are three spots where you should leverage it so that the panel does not break.

  4. Remove the plug on the bottom of the screen.
    • Remove the plug on the bottom of the screen.

  5. Remove the two screws on the bottom of the computer screen.
    • Remove the two screws on the bottom of the computer screen.

  6. Remove the tape and the LCD plug/connector from the back of the screen.
    • Remove the tape and the LCD plug/connector from the back of the screen.

  7. Remove the three screws on the left and right of the screen. Remove the three screws on the left and right of the screen.
    • Remove the three screws on the left and right of the screen.

  8. Remove the screen from the metal side frames.
    • Remove the screen from the metal side frames.

Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 2

Ultimos 30 días: 6

Todo El Tiempo: 698