Partes

No se requieren partes.

  1. Slide the battery release latch until it clicks into place.
    • Slide the battery release latch until it clicks into place.

    • Slide the battery out of the battery bay.

  2. Turn the computer over and loosen the six captive screws on the base cover.
    • Turn the computer over and loosen the six captive screws on the base cover.

    • Lift the base cover off the computer.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the two screws that secure the hard drive to the computer base.
    • Remove the two screws that secure the hard drive to the computer base.

    • Slide the hard drive away from the connector using the pull-tab.

  5. Tilt the hard drive by 45-degrees and lift it out of the computer base.
    • Tilt the hard drive by 45-degrees and lift it out of the computer base.

  6. Remove the four screws that secure the hard drive to the hard drive bracket.
    • Remove the four screws that secure the hard drive to the hard drive bracket.

    • Lift the hard drive off the hard drive bracket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Miembro Desde 28/02/18

35,735 Reputación

408 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

15 Miembros

925 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 39