Saltar al contenido principal

Dell Studio 1435 Hard Drive Replacement

Qué necesitas

  1. Dell Studio 1435 Hard Drive Replacement, Battery: paso 1, imagen 1 de 1
    • Slide the battery release latch to the side.

    • Slide the battery out of the battery bay.

  2. Dell Studio 1435 Hard Drive Replacement, Base Cover: paso 2, imagen 1 de 1
    • Loosen the seven captive screws on the base cover and lift the cover off the computer at an angle as shown in the figure.

  3. Dell Studio 1435 Hard Drive Replacement, Hard Drive: paso 3, imagen 1 de 1
    • Remove the two screws on the hard drive assembly.

  4. Dell Studio 1435 Hard Drive Replacement: paso 4, imagen 1 de 1
    • Pull the pull tab to disconnect the hard drive assembly from the system board connector.

    • Pull the interposer to detach it from the hard drive.

    • Remove the four screws (two on either side) to detach the hard drive cage from the hard drive.

    • Lift the hard drive cage off the hard drive.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Miembro Desde 02/28/18

44,830 Reputación

408 Guías creadas

Equipo

RampUP America, Inc. Miembro de RampUP America, Inc.

Community

42 Miembros

1,985 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 0

Todo El Tiempo: 343