Saltar al contenido principal

Dell Streak 7 Screen Replacement

Qué necesitas

  1. Dell Streak 7 Screen  Replacement, Front Panel Assembly: paso 1, imagen 1 de 1
    • Insert the spudger under the capacitive button panel, and slide the spudger all the way around.

    • You will want to heat up the screen edges with the iOpener to help facilitate removal.

  2. Dell Streak 7 Screen  Replacement: paso 2, imagen 1 de 1
    • Remove the button cover by lifting the cover away from the tablet.

  3. Dell Streak 7 Screen  Replacement: paso 3, imagen 1 de 1
    • Using the Torx screwdriver, remove the 4mm screws.

  4. Dell Streak 7 Screen  Replacement: paso 4, imagen 1 de 1
    • With the Torx screwdriver, remove the two 5mm screws.

  5. Dell Streak 7 Screen  Replacement: paso 5, imagen 1 de 2 Dell Streak 7 Screen  Replacement: paso 5, imagen 2 de 2
    • Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.

    • With the Torx screwdriver, remove the two 4mm screws.

  6. Dell Streak 7 Screen  Replacement: paso 6, imagen 1 de 1
    • Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

  7. Dell Streak 7 Screen  Replacement: paso 7, imagen 1 de 2 Dell Streak 7 Screen  Replacement: paso 7, imagen 2 de 2
    • Ribbon cables are very sensitive and prone to breaking

    • Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.

    • Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

  8. Dell Streak 7 Screen  Replacement, Screen: paso 8, imagen 1 de 1
    • Using the screwdriver, remove the 3mm Torx T5 screws around the metal housing.

  9. Dell Streak 7 Screen  Replacement: paso 9, imagen 1 de 1
    • Using tweezers, peel off the tape securing the screen to the metal cage around it.

  10. Dell Streak 7 Screen  Replacement: paso 10, imagen 1 de 2 Dell Streak 7 Screen  Replacement: paso 10, imagen 2 de 2
    • Ribbon cables are very sensitive and prone to breaking

    • Pull out the ribbon cables through the opening in the metal cage.

    • Lift up the metal cage surrounding the screen by swinging the cage from one side.

  11. Dell Streak 7 Screen  Replacement: paso 11, imagen 1 de 1
    • Remove the screen by lifting the screen from the front glass.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Ali Benjelloun

Miembro Desde 10/02/16

376 Reputación

3 Guías creadas

Equipo

USF Tampa, Team 4-6, Passmore Fall 2016 Miembro de USF Tampa, Team 4-6, Passmore Fall 2016

USFT-PASSMORE-F16S4G6

3 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 459