Repara tus cosas Comunidad Tienda

Dell Streak 7 Motherboard Replacement

Qué necesitas

  1. Dell Streak 7 Motherboard Replacement, Front Panel Assembly: paso 1, imagen 1 de 1

    • Insert the spudger under the capacitive button panel, and slide the spudger all the way around.

    • You will want to heat up the screen edges with the iOpener to help facilitate removal.

    Editar

  2. Dell Streak 7 Motherboard Replacement: paso 2, imagen 1 de 1

    • Remove the button cover by lifting the cover away from the tablet.

    Editar

  3. Dell Streak 7 Motherboard Replacement: paso 3, imagen 1 de 1

    • Using the Torx screwdriver, remove the 4mm screws.

    Editar

  4. Dell Streak 7 Motherboard Replacement: paso 4, imagen 1 de 1

    • With the Torx screwdriver, remove the two 5mm screws.

    Editar

  5. Dell Streak 7 Motherboard Replacement: paso 5, imagen 1 de 2 Dell Streak 7 Motherboard Replacement: paso 5, imagen 2 de 2

    • Using the spudger, insert it under the black side panel. Slide the spudger all the way around until the cover piece comes off.

    • With the Torx screwdriver, remove the two 4mm screws.

    Editar

  6. Dell Streak 7 Motherboard Replacement: paso 6, imagen 1 de 1

    • Use the spudger to go along the edges of the device and pop out the latches securing the display to the case.

    Editar

  8. Dell Streak 7 Motherboard Replacement: paso 7, imagen 1 de 2 Dell Streak 7 Motherboard Replacement: paso 7, imagen 2 de 2

    • Ribbon cables are very sensitive and prone to breaking

    • Disconnect the ribbon cables by unlocking the connector and pulling the cable out slowly.

    • Make sure all the cables are unplugged before opening the device completely. Failure to do so might lead to broken or torn cables.

    Editar

  9. Dell Streak 7 Motherboard Replacement, Headphone Jack: paso 8, imagen 1 de 1

    • Using the spudger, disconnect the ribbon cable by lifting up on the connector.

    • Ribbon cables are fragile and easily broken.

    Editar

  10. Dell Streak 7 Motherboard Replacement: paso 9, imagen 1 de 2 Dell Streak 7 Motherboard Replacement: paso 9, imagen 2 de 2

    • Pull the headphone jack up, away from the case.

    Editar

  11. Dell Streak 7 Motherboard Replacement, GSM Module: paso 10, imagen 1 de 2 Dell Streak 7 Motherboard Replacement, GSM Module: paso 10, imagen 2 de 2

    • With the spudger, disconnect the antenna cable located on the module.

    Editar

  12. Dell Streak 7 Motherboard Replacement: paso 11, imagen 1 de 2 Dell Streak 7 Motherboard Replacement: paso 11, imagen 2 de 2

    • Using tweezers, remove the tape connected to the GSM module.

    Editar

  13. Dell Streak 7 Motherboard Replacement: paso 12, imagen 1 de 2 Dell Streak 7 Motherboard Replacement: paso 12, imagen 2 de 2

    • Remove the two 3mm screws securing the GSM module. Use the Torx screwdriver.

    Editar

  14. Dell Streak 7 Motherboard Replacement: paso 13, imagen 1 de 1

    • Disconnect the GSM module by lifting the module up, out of the case.

    Editar

  15. Dell Streak 7 Motherboard Replacement, Motherboard: paso 14, imagen 1 de 3 Dell Streak 7 Motherboard Replacement, Motherboard: paso 14, imagen 2 de 3 Dell Streak 7 Motherboard Replacement, Motherboard: paso 14, imagen 3 de 3

    • Using the spudger, disconnect the front camera by lifting up on the connector.

    Editar

  16. Dell Streak 7 Motherboard Replacement: paso 15, imagen 1 de 1

    • Using the Torx screwdriver, remove the six 3mm screws .

    Editar

  17. Dell Streak 7 Motherboard Replacement: paso 16, imagen 1 de 2 Dell Streak 7 Motherboard Replacement: paso 16, imagen 2 de 2

    • Lift up the metal cover.

    Editar

  18. Dell Streak 7 Motherboard Replacement: paso 17, imagen 1 de 1

    • Use the spudger to lift the vibration motor out of the case.

    Editar

  19. Dell Streak 7 Motherboard Replacement: paso 18, imagen 1 de 1

    • Pull out the motherboard and the battery.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Jair Garcia Varela

Miembro Desde 09/29/16

301 Reputación

2 Guías creadas

Insignias: 9

+ 6 más insignias

Equipo

USF Tampa, Team 4-6, Passmore Fall 2016 Miembro de USF Tampa, Team 4-6, Passmore Fall 2016

USFT-PASSMORE-F16S4G6

3 Miembros

12 Guías creadas

Un comentario

do you know any website or if you guys even sell the board to him

leonardo_hitman - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 322