Partes

No se requieren partes.

  1. Slide the release latch to unlock the battery. Flip and remove the battery from the computer.
    • Slide the release latch to unlock the battery.

    • Flip and remove the battery from the computer.

  2. Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover. Flip and remove the base cover from the computer.
    • Remove the screws that secure the base cover to the computer. Press the rubber tabs towards the rear of the computer to disengage the base cover.

    • Flip and remove the base cover from the computer.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Pry up the keyboard trim starting from the top-inner edge. Pry up the bottom edge of the keyboard trim from the top-inner edge.
    • Pry up the keyboard trim starting from the top-inner edge.

    • Pry up the bottom edge of the keyboard trim from the top-inner edge.

  5. Remove the screws that secure the keyboard to the computer. Starting from the bottom of the keyboard, separate the keyboard from the computer and flip the keyboard over. Disconnect the keyboard-data cable from the system board and remove the keyboard.
    • Remove the screws that secure the keyboard to the computer.

    • Starting from the bottom of the keyboard, separate the keyboard from the computer and flip the keyboard over.

    • Disconnect the keyboard-data cable from the system board and remove the keyboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Johnathan Hammond

Miembro Desde 28/02/18

35,735 Reputación

408 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

15 Miembros

925 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 20

Todo El Tiempo: 288