Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

These are the steps to remove the screen from the Precision Dell 5510, see the prerequisites for the back removal.

  1. Open the system badge flap over to reveal the screws underneath (marked 1 on the image).
    • Open the system badge flap over to reveal the screws underneath (marked 1 on the image).

    • Remove the 12 screws that secure the base cover to the computer.

  2. Pry the edges base cover and lift it to remove it from computer.
    • Pry the edges base cover and lift it to remove it from computer.

  3. Unplug the connection that links the battery to the computer. Unplug the connection that links the battery to the computer.
    • Unplug the connection that links the battery to the computer.

  4. Remove the four 4.0 mm JIS #0 screws surrounding the battery. Remove the four 4.0 mm JIS #0 screws surrounding the battery.
    • Remove the four 4.0 mm JIS #0 screws surrounding the battery.

  5. Carefully remove the battery from the computer. Carefully remove the battery from the computer.
    • Carefully remove the battery from the computer.

  6. Remove the six 4.0 mm Phillips #1 screws. Remove the six 4.0 mm Phillips #1 screws.
    • Remove the six 4.0 mm Phillips #1 screws.

  7. Unscrew the one 4.0 mm Phillips #1 screw from the WiFi chip, then remove it. Unscrew the one 4.0 mm Phillips #1 screw from the WiFi chip, then remove it.
    • Unscrew the one 4.0 mm Phillips #1 screw from the WiFi chip, then remove it.

  8. Disconnect the black wire. Use tweezers to help. Disconnect the black wire. Use tweezers to help.
    • Disconnect the black wire. Use tweezers to help.

  9. Disconnect the multi wire. Use tweezers to help. Disconnect the multi wire. Use tweezers to help.
    • Disconnect the multi wire. Use tweezers to help.

  10. Remove the 1.0 mm Phillips #1 screw. Remove the 1.0 mm Phillips #1 screw.
    • Remove the 1.0 mm Phillips #1 screw.

  11. Flip the laptop over, so it is sitting in the normal upright position. Hold onto the screen, and pull the keyboard up and away from the screen. Flip the laptop over, so it is sitting in the normal upright position. Hold onto the screen, and pull the keyboard up and away from the screen.
    • Flip the laptop over, so it is sitting in the normal upright position. Hold onto the screen, and pull the keyboard up and away from the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Atlanta Phelps

Miembro Desde 28/08/18

313 Reputación

3 Guías creadas

Equipo

IUPUI, Team S1-G5, Arle Fall 2018 Miembro de IUPUI, Team S1-G5, Arle Fall 2018

IUPUI-ARLE-F18S1G5

3 Miembros

3 Guías creadas

Can I just change the LCD? Or is changing the entire display assembly the only option?

John Gaines - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 23

Ultimos 30 días: 87

Todo El Tiempo: 1,789