Introducción

Replace the Upper Fan in the computer tower to prevent overheating and computer damage.

Partes

No se requieren partes.

Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
  • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

  • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

Agregar Comentario

Lay the computer on its side; you will see a blue knob.
  • Lay the computer on its side; you will see a blue knob.

  • Turn this knob 90 deg clockwise.

Agregar Comentario

  • Slide the panel case forward about 1/2 inch while knob is turned.

  • Lift panel case off computer.

Agregar Comentario

  • Remove the large blue cover from the computer. There are no screws or tabs holding it in place.

Agregar Comentario

  • Remove the power supply that connects the upper fan to the motherboard. The power supply has black, red, green and yellow wires.

Agregar Comentario

  • Remove the rubber grommets from the base of the fan. A screwdriver or spudger may be useful.

Agregar Comentario

  • Pull the upper fan out of the computer.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

7 personas más completaron esta guía.

Tom

Miembro Desde 04/10/10

799 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 22-4, Maness Fall 2010 Miembro de Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Miembros

13 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 5

Todo El Tiempo: 4,683