Introducción

Replace the Heat Sink on the Motherboard to maintain optimal performance

Herramientas

No se requieren herramientas.

Partes

No se requieren partes.

  1. Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.
    • Make sure the computer is turned off, by selecting the start menu and choosing “Shut Down”.

    • Ensure all cables, speakers and other devices are unplugged and turned off before opening the computer case.

  2. Lay the computer on its side; you will see a blue knob.
    • Lay the computer on its side; you will see a blue knob.

    • Turn this knob 90 deg clockwise.

    • Slide the panel case forward about 1/2 inch while knob is turned.

    • Lift panel case off computer.

    • Remove the large blue cover from the computer, there are no screws or tabs keeping it in place.

    • Press down on the release tab above the heat sink.

    • Pull the heat sink out of the computer while pressing on the release tab.

    • When reassembling make sure to clean the processor and heat sink of all old thermal paste and apply new paste to the processor

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Tom

Miembro Desde 04/10/10

799 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 22-4, Maness Fall 2010 Miembro de Cal Poly, Team 22-4, Maness Fall 2010

CPSU-MANESS-F10S22G4

4 Miembros

13 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 7

Últimos 30 Días: 15

Todo El Tiempo: 5,666