Saltar al contenido principal

Introducción

This guide is of a dell optiplex mini tower.

This guide will tell you how to replace your CPU.

  1. Power down your PC and remove the power cord from the back. Power down your PC and remove the power cord from the back.
    • Power down your PC and remove the power cord from the back.

  2. Press and hold the power button for about 10 seconds, then release. This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.
    • Press and hold the power button for about 10 seconds, then release.

    • This helps drain any remaining power stored in the capacitors, so that you can safely work on the internal components.

  3. With the computer standing upright, firmly pull on the tab at the back of the computer.
    • With the computer standing upright, firmly pull on the tab at the back of the computer.

    • When the side panel pops free, gently pull the panel away from the computer.

    • If you have trouble freeing the side panel from the case, you may need to pull the tab a bit harder.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Move the cables out of your way. SATA Power SATA Data
    • Move the cables out of your way.

    • SATA Power

    • SATA Data

  6. Unplug the power cable Unplug the data cable Unplug the data cable
    • Unplug the power cable

    • Unplug the data cable

  7. Unplug the fan that is on the motherboard. Unplug the fan that is on the motherboard.
    • Unplug the fan that is on the motherboard.

  8. There is two Phillips #2 screws that need to be removed. The two screws have springs that keep them there.
    • There is two Phillips #2 screws that need to be removed.

    • The two screws have springs that keep them there.

  9. Lift the heat sink. Lift the heat sink. Lift the heat sink.
    • Lift the heat sink.

  10. Push and release tap on it. And then take the CPU out. Remember to put new thermal paste on the CPU. Remember to put new thermal paste on the CPU.
    • Push and release tap on it. And then take the CPU out.

    • Remember to put new thermal paste on the CPU.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Padraic Hoselton

Miembro Desde 22/08/17

2,888 Reputación

13 Guías creadas

Equipo

Master Techs Miembro de Master Techs

Community

286 Miembros

808 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 4

Últimos 30 Días: 14

Todo El Tiempo: 511