Saltar al contenido principal

Dell OptiPlex GX260 Power Supply Replacement

Qué necesitas

  1. Dell OptiPlex GX260 Power Supply Replacement, Case: paso 1, imagen 1 de 2 Dell OptiPlex GX260 Power Supply Replacement, Case: paso 1, imagen 2 de 2
    • Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.

    • Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

    • Note: Some force may be required to push in the oval buttons open the PC case.

    cool de faires des sites comme ca :)

    baptiste Prando - Contestar

    Excellent - Only comment - do the the green brackets come with a new hard drive or should I leave them inside the case for the next owner - Removing to donate to recycling

    sheila_jones - Contestar

    I got this yesterday....up and running now....how on earth do I MERGE the 18GB partition D with C....there is just NO option there.

    Elvis 1357 - Contestar

    I got this yesterday....up and running now....how on earth do I MERGE the 18GB partition D with C....there is just NO option there.

    Also, want to add another HD....but, there are no cables at all?

    Elvis 1357 - Contestar

  2. Dell OptiPlex GX260 Power Supply Replacement, Power Supply: paso 2, imagen 1 de 1
    • Locate the power supply in the case.

    • Disconnect the AXT power cable to the motherboard.

    • Disconnect the P4 12 volt power cable from the motherboard.

    • Disconnect the power cable from the optical drive.

    • Disconnect the floppy drive power cable.

    • Disconnect the hard drive power cable.

  3. Dell OptiPlex GX260 Power Supply Replacement: paso 3, imagen 1 de 1
    • Remove the two Phillip screws holding the power supply into the the case and lift the power supply out.

    • When installing a new power supply ensure that the voltage selector is correctly set before you connect the mains cable.

    • Incorrect voltage settings will damage the power supply and may also cause other components to be damaged.

  4. Dell OptiPlex GX260 Power Supply Replacement: paso 4, imagen 1 de 1
    • Push down on the green tab with one hand.

    • With your other hand, grip the top of the power supply and pull back and up to remove from the case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Kevin Schapansky

Miembro Desde 10/05/10

1,457 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 4-48, Amido Fall 2010 Miembro de Cal Poly, Team 4-48, Amido Fall 2010

CPSU-AMIDO-F10S4G48

4 Miembros

27 Guías creadas

Un comentario

In mine, the power supply was much longer due to a fan located on the front end. Same basic disassembly, however. There was a green tab at the front and it was difficult, but the power supply (with effort) did slide forward and out.

jknox - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 4

Ultimos 30 días: 20

Todo El Tiempo: 13,132