Saltar al contenido principal

Dell OptiPlex GX260 Optical Drive Replacement

Qué necesitas

  1. Dell OptiPlex GX260 Optical Drive Replacement, Case: paso 1, imagen 1 de 2 Dell OptiPlex GX260 Optical Drive Replacement, Case: paso 1, imagen 2 de 2
    • Lay the Dell Optiplex GX260 down on a clean flat surface with the rear towards you.

    • Push the oval shaped buttons located on the top and bottom of the PC simultaneously and lift the case straight up.

    • Note: Some force may be required to push in the oval buttons open the PC case.

  2. Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: paso 2, imagen 1 de 3 Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: paso 2, imagen 2 de 3 Dell OptiPlex GX260 Optical Drive Replacement, Optical Drive: paso 2, imagen 3 de 3
    • Identify the optical drive in the case.

    • Remove the analog audio cable from the optical drive.

    • Remove the IDE cable form the optical drive by pulling straight up on the orange plastic tab..

    • Remove the power cable from the optical drive.

  3. Dell OptiPlex GX260 Optical Drive Replacement: paso 3, imagen 1 de 1
    • Push the two green tabs toward each other to release the optical drive and lift it out.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

Kevin Schapansky

Miembro Desde 10/05/10

1,457 Reputación

9 Guías creadas

Equipo

Cal Poly, Team 4-48, Amido Fall 2010 Miembro de Cal Poly, Team 4-48, Amido Fall 2010

CPSU-AMIDO-F10S4G48

4 Miembros

27 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 7

Todo El Tiempo: 8,834