Saltar al contenido principal

Introducción

The WLAN Adapter Card is what allows the computer to connect to Wi-Fi.

The WLAN Adapter Card is connected to the laptop by 2 J0 PH screws with a head size of 4.44 mm and a length of 3.67 mm.

Partes

No se especificaron partes.

  1. With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop. When the latches are unlocked, a small logo resembling an open padlock will become visible.
    • With the laptop closed and the bottom side facing up, slide the two battery latches towards the sides of the laptop.

    • When the latches are unlocked, a small logo resembling an open padlock will become visible.

  2. Grasp the battery from the top and pull upward. Grasp the battery from the top and pull upward.
    • Grasp the battery from the top and pull upward.

  3. Remove the ten 8.6 mm JIS #0 screws. Remove the ten 8.6 mm JIS #0 screws.
    • Remove the ten 8.6 mm JIS #0 screws.

  4. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  5. Place fingers underneath cover and pull off the cover.
    • Place fingers underneath cover and pull off the cover.

  6. Gently pull the two wires connected to the WLAN Adapter Card.
    • Gently pull the two wires connected to the WLAN Adapter Card.

  7. Remove the two electrode connectors. Remove the single 3.67 mm JIS #0 screw that holds the WLAN Adapter Card to the laptop.
    • Remove the two electrode connectors.

    • Remove the single 3.67 mm JIS #0 screw that holds the WLAN Adapter Card to the laptop.

    • The WLAN Adapter Card will pop up once the screws are taken out.

  8. Pull WLAN Adapter Card to remove it from the laptop. Pull WLAN Adapter Card to remove it from the laptop.
    • Pull WLAN Adapter Card to remove it from the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Alec Weiss

Miembro Desde 05/11/18

752 Reputación

8 Guías creadas

Equipo

IUPUI, Team S2-G2, Baechle Fall 2018 Miembro de IUPUI, Team S2-G2, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G2

3 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 5

Todo El Tiempo: 86