Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Dell Latitude E4310 Display Replacement

Qué necesitas

  1. Dell Latitude E4310 Display Replacement, Battery: paso 1, imagen 1 de 1
    • Power down the laptop and remove all power cords.

  2. Dell Latitude E4310 Display Replacement: paso 2, imagen 1 de 2 Dell Latitude E4310 Display Replacement: paso 2, imagen 2 de 2
    • Push in the battery release button with your thumb.

    • Pull up on the battery to remove.

  3. Dell Latitude E4310 Display Replacement, Display: paso 3, imagen 1 de 3 Dell Latitude E4310 Display Replacement, Display: paso 3, imagen 2 de 3 Dell Latitude E4310 Display Replacement, Display: paso 3, imagen 3 de 3
    • Open up the laptop and flatten it down on a workable surface.

    • Turn it around so that the screen is closest to you.

    • Insert the flat end of a spudger, or plastic opening tool, into the groove between the screen bezel and top case.

    • Twist the spudger, or plastic opening tool, until you hear a clicking sound and continue doing this around the entirety of the display.

    • Remove the bezel.

  4. Dell Latitude E4310 Display Replacement: paso 4, imagen 1 de 2 Dell Latitude E4310 Display Replacement: paso 4, imagen 2 de 2
    • Remove the six 0.3mm Phillips #1 screws.

  5. Dell Latitude E4310 Display Replacement: paso 5, imagen 1 de 2 Dell Latitude E4310 Display Replacement: paso 5, imagen 2 de 2
    • Remove the two 0.5mm Phillips #1 screws.

    • There are two screws located at each corner. Only remove the ones closest to the outer edge.

  6. Dell Latitude E4310 Display Replacement: paso 6, imagen 1 de 2 Dell Latitude E4310 Display Replacement: paso 6, imagen 2 de 2
    • Carefully lift the screen up and flip it over onto the keyboard side as if you were turning the page of a book.

  7. Dell Latitude E4310 Display Replacement: paso 7, imagen 1 de 3 Dell Latitude E4310 Display Replacement: paso 7, imagen 2 de 3 Dell Latitude E4310 Display Replacement: paso 7, imagen 3 de 3
    • Use a pair of tweezers to flip the blue tape 180 degrees.

    • By flipping the tape you disconnect the display connector.

  8. Dell Latitude E4310 Display Replacement: paso 8, imagen 1 de 1
    • Remove the screen from the laptop.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 7

Todo El Tiempo: 1,493