Saltar al contenido principal

Dell Latitude E4200 SSD Replacement

Qué necesitas

  1. Dell Latitude E4200 SSD Replacement, Back Panel: paso 1, imagen 1 de 1
    • Use PH0 screwdriver to unscrew the 4.49x7.88 mm screw in the middle of the back panel.

  2. Dell Latitude E4200 SSD Replacement: paso 2, imagen 1 de 3 Dell Latitude E4200 SSD Replacement: paso 2, imagen 2 de 3 Dell Latitude E4200 SSD Replacement: paso 2, imagen 3 de 3
    • Place thumbs flat on the front side of the back panel (the side to open the laptop).

    • Push panel upwards sliding it out of the locked position.

    • Lift panel out of socket.

  3. Dell Latitude E4200 SSD Replacement: paso 3, imagen 1 de 1
    • Remove panel and screw from the device. This opens up the main board of the device.

  4. Dell Latitude E4200 SSD Replacement, SSD: paso 4, imagen 1 de 1
    • Unscrew the two 4.10x4.05 mm screws holding the SSD in place.

  5. Dell Latitude E4200 SSD Replacement: paso 5, imagen 1 de 1
    • Using your finger and thumb lift the hard drive out of the computer but do not disconnect the attached connector to the computer.

  6. Dell Latitude E4200 SSD Replacement: paso 6, imagen 1 de 1
    • By applying pressure to the sides of the connector, pull the connector apart from the SSD.

Conclusión

To reassemble your device, follow these instructions in reverse order.

6 personas más completaron esta guía.

Equipo

Baylor, Team 5-6, Williams Spring 2015 Miembro de Baylor, Team 5-6, Williams Spring 2015

BU-WILLIAMS-S15S5G6

4 Miembros

6 Guías creadas

Un comentario

You can use any mSATA SSD as replacement by using the following caddy/adapter:

https://www.ebay.fr/itm/166263029472

jacques_06 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 10

Ultimos 30 días: 34

Todo El Tiempo: 8,341