Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Locate the notch under the cover at the top of the keyboard
-
Using the spudger as a lever, lift the plastic covering
-
Carefully remove the rest of the covering from right to left
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the top portion of the keyboard using a #00 screwdriver
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Hold keyboard from the top and gently pull towards the LCD screen to remove the keyboard from the case
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Once keyboard is out of the case, lay it face-down on the track pad
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a small spudger, pull back on the black bar to release the blue lever
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull up on the metal bar connected to the socket to detach the ribbon cable
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the keyboard removed, you should be able to see ram slot A.
-
Place new ram into the slot making sure it is aligned
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Replace the keyboard by following the previous steps in reverse
-
Close the laptop, and flip it over onto its backside
-
Cancelar: No complete esta guía.
26 personas más completaron esta guía.
2 comentarios
If you are increasing the amount of RAM installed -> On first power on after installing the RAM, system on boot up will complain about memory size changed, and to reseat the memory. Wait for about 60 - 90 seconds, and you will receive a few additional messages about F1 to continue or F2 for Setup. Go into Setup and verify that the system sees all memory installed. If installing 2 x 2GB DDR2, max possible, 4GB. BIOS setup should report 4GB installed, of which 3.37GB usable.
J’étais inquiet, mais en lisant votre commentaire, me voilà rassuré et j’ai donc suivi vos instructions. Ca fonctionne 2X2 GO …Merci