Saltar al contenido principal

Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.

Qué necesitas

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 1
    • Power down the laptop and remove the battery.

    • Open the laptop cover all of the way.

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 3 : paso 2, imagen 2 de 3 : paso 2, imagen 3 de 3
    • Locate the notch under the cover at the top of the keyboard

    • Using the spudger as a lever, lift the plastic covering

    • Carefully remove the rest of the covering from right to left

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • Unscrew the top portion of the keyboard using a #00 screwdriver

  4. Este paso está sin traducir. Ayuda a traducirlo

    : paso 4, imagen 1 de 1
    • Hold keyboard from the top and gently pull towards the LCD screen to remove the keyboard from the case

    • Don't pull on the keyboard too forcefully because it is attached to the motherboard with a short, thin ribbon cable

  5. Este paso está sin traducir. Ayuda a traducirlo

    : paso 5, imagen 1 de 2 : paso 5, imagen 2 de 2
    • Once keyboard is out of the case, lay it face-down on the track pad

  6. Este paso está sin traducir. Ayuda a traducirlo

    : paso 6, imagen 1 de 2 : paso 6, imagen 2 de 2
    • Using a small spudger, pull back on the black bar to release the blue lever

  7. Este paso está sin traducir. Ayuda a traducirlo

    : paso 7, imagen 1 de 1
    • Pull up on the metal bar connected to the socket to detach the ribbon cable

  8. Este paso está sin traducir. Ayuda a traducirlo

    : paso 8, imagen 1 de 1
    • Detach cables that connect the display to the body of the laptop

  9. Este paso está sin traducir. Ayuda a traducirlo

    : paso 9, imagen 1 de 1
    • Disconnect the black cable attached to the motherboard

  10. Este paso está sin traducir. Ayuda a traducirlo

    : paso 10, imagen 1 de 2 : paso 10, imagen 2 de 2
    • Close the laptop lid

    • Turn the laptop over onto its backside

    • Unscrew the two screws shown in the picture using a #00 screwdriver

  11. Este paso está sin traducir. Ayuda a traducirlo

    : paso 11, imagen 1 de 2 : paso 11, imagen 2 de 2
    • Face the laptop's back ports towards you

    • Unscrew the two screws labeled in the picture using a #00 screwdriver

  12. Este paso está sin traducir. Ayuda a traducirlo

    : paso 12, imagen 1 de 1
    • Turn the laptop over again so it's right-side up

    • Open the display, and pull the display up and out of the laptop's body

  13. Este paso está sin traducir. Ayuda a traducirlo

    : paso 13, imagen 1 de 1
    • Remove the circular rubber pads as outlined in the picture using a spudger

  14. Este paso está sin traducir. Ayuda a traducirlo

    : paso 14, imagen 1 de 1
    • Unscrew the screws that were under the rubber circles using the #00 screwdriver

  15. Este paso está sin traducir. Ayuda a traducirlo

    : paso 15, imagen 1 de 1
    • Carefully use a spudger to work around the edge of the screen to lift off the plastic cover

    • Be very careful while doing this as the plastic snaps easily

  16. Este paso está sin traducir. Ayuda a traducirlo

    : paso 16, imagen 1 de 1
    • Remove the screws outlined in the picture

  17. Este paso está sin traducir. Ayuda a traducirlo

    : paso 17, imagen 1 de 1
    • Carefully lift the LCD screen out of its casing

Linea de Meta

19 personas más completaron esta guía.

Miguel Wong

Miembro Desde 04/15/10

562 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 24-35, Regan Spring 2010 Miembro de Cal Poly, Team 24-35, Regan Spring 2010

CPSU-REGAN-S10S24G35

4 Miembros

4 Guías creadas

Un comentario

Check out this replacement screen at a great price on bcdelectrostore.com

http://www.bcdelectrostore.com/magento/l...

bob harris - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 6

Ultimos 30 días: 35

Todo El Tiempo: 33,011