Repara tus cosas Comunidad Tienda

Dell Latitude 9510 Fan Replacement

Qué necesitas

  1. Dell Latitude 9510 Fan Replacement, Base Panel: paso 1, imagen 1 de 1

    • Flip the device so that the base plate is facing you.

    • Use a Phillips #0 screwdriver to remove the nine 5.5 mm screws securing the base plate.

    Editar

  2. Dell Latitude 9510 Fan Replacement: paso 2, imagen 1 de 1

    • Wedge a spudger between the base plate and the chassis, then gently pry around the entire perimeter to release the base plate.

    • Remove the base plate.

    Editar

  4. Dell Latitude 9510 Fan Replacement, Speakers: paso 3, imagen 1 de 1

    • Use a Phillips #0 screwdriver to remove the four 2 mm screws from the speakers.

    Editar

  5. Dell Latitude 9510 Fan Replacement: paso 4, imagen 1 de 1

    • Use a spudger to gently lever the speaker connector out of its port.

    • Lift the speakers up and out.

    Editar

  6. Dell Latitude 9510 Fan Replacement, Fan: paso 5, imagen 1 de 1

    • Use a Phillips #0 screwdriver to remove the two 3 mm screws securing the fan.

    Editar

  7. Dell Latitude 9510 Fan Replacement: paso 6, imagen 1 de 1

    • Place your fingernails behind the plastic tabs on the speaker's motherboard connector, then pull directly backwards, toward the wires, until the connector releases from its port.

    • Lift the fan up and out.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 139