Saltar al contenido principal

Dell Inspiron N4110 Motherboard Replacement

Qué necesitas

  1. Dell Inspiron N4110 Motherboard Replacement, Battery: paso 1, imagen 1 de 1
    • Make sure the laptop is off and unplugged before starting this step.

    • Locate the battery on the underside of the laptop.

    • Push the two battery clips following the direction of the arrows.

  2. Dell Inspiron N4110 Motherboard Replacement: paso 2, imagen 1 de 1
    • Push upward from the base of the battery.

  3. Dell Inspiron N4110 Motherboard Replacement: paso 3, imagen 1 de 1
    • Pull battery away from computer until it is fully removed.

    Don’t forget to remove the two screws in the battery compartment before attempting to pry off the top case!

    Wils - Contestar

  4. Dell Inspiron N4110 Motherboard Replacement, Fan: paso 4, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement, Fan: paso 4, imagen 2 de 2
    • Remove the 10 2.5x5 mm screws from the base of the laptop.

  5. Dell Inspiron N4110 Motherboard Replacement: paso 5, imagen 1 de 1
    • Unscrew the final 2.5x5 mm screw attached to the cover.

    • This screw is "captive" and does not detach from the cover. Make sure the screw is fully unscrewed before attempting to remove the cover.

  6. Dell Inspiron N4110 Motherboard Replacement: paso 6, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 6, imagen 2 de 2
    • Remove the cover from the laptop.

  7. Dell Inspiron N4110 Motherboard Replacement: paso 7, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 7, imagen 2 de 2
    • Unscrew the 2.5x5 mm screw inside the RAM compartment.

  8. Dell Inspiron N4110 Motherboard Replacement: paso 8, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 8, imagen 2 de 2
    • Remove the disk drive from the side of the computer.

    • There is no need to press the button, the drive will come out.

  9. Dell Inspiron N4110 Motherboard Replacement: paso 9, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 9, imagen 2 de 2
    • Unscrew the two 2x3 mm screws inside the disk drive compartment.

  10. Dell Inspiron N4110 Motherboard Replacement: paso 10, imagen 1 de 3 Dell Inspiron N4110 Motherboard Replacement: paso 10, imagen 2 de 3 Dell Inspiron N4110 Motherboard Replacement: paso 10, imagen 3 de 3
    • Flip the computer over, and open the laptop.

    • Use a plastic opening tool to begin to remove the keyboard.

    • Use your hands to finish separating the keyboard from the laptop.

    • This can be a bit challenging, but it will come loose.

    Just the Keyboard: Removing the base cover is next.

    Morris Stevens - Contestar

  11. Dell Inspiron N4110 Motherboard Replacement: paso 11, imagen 1 de 1
    • Lift the black clip from the tan connection for the keyboard.

    • Pull the the connection away from the clip.

    • Move the keyboard away from the laptop.

    • With the keyboard removed, consider this opportunity to more freely clean it out with some compressed air.

  12. Dell Inspiron N4110 Motherboard Replacement: paso 12, imagen 1 de 1
    • Lift the black clips from the tan connections for all 3 locations marked.

    • Remove the connections from the clips.

  13. Dell Inspiron N4110 Motherboard Replacement: paso 13, imagen 1 de 1
    • Unscrew the five 2.5x5 mm screws.

  14. Dell Inspiron N4110 Motherboard Replacement: paso 14, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 14, imagen 2 de 2
    • Use plastic opening tools to remove base cover.

    • Use your hands to fully remove cover from the base.

    • This may be difficult, but it is possible.

  15. Dell Inspiron N4110 Motherboard Replacement: paso 15, imagen 1 de 1
    • Disconnect the two cables that connect the speaker and the fan.

    • These can just be pulled out, they do not have clips.

  16. Dell Inspiron N4110 Motherboard Replacement: paso 16, imagen 1 de 1
    • Disconnect the ribbon cable over the screw to reveal it. Flip up the latch and pull gently on the ribbon to remove it from the connector.

    • Unscrew the 2.5x5 mm screw from the fan.

    Disconnect the ribbon cable over the crew to reveal it. Flip up the latch and pull gently on the ribbon to remove it from the connector.

    Wils - Contestar

  17. Dell Inspiron N4110 Motherboard Replacement: paso 17, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 17, imagen 2 de 2
    • Pull up and remove the fan from the laptop.

  18. Dell Inspiron N4110 Motherboard Replacement, Motherboard: paso 18, imagen 1 de 1
    • Unscrew the six 2.5x5mm screws from the motherboard.

    • Note that this screw may be "retained" by the loop at the end of the grounding wire.

    This step is also incorrect. The screw sizes here are not 2.5x3 mm, they are all 2.5x5 mm.

    apocalypse612 - Contestar

  19. Dell Inspiron N4110 Motherboard Replacement: paso 19, imagen 1 de 2 Dell Inspiron N4110 Motherboard Replacement: paso 19, imagen 2 de 2
    • Disconnect the black and yellow cable from the motherboard.

    Also remove the grounding screw next to it.

    Morris Stevens - Contestar

    The grounding cable was already removed in the previous step it was one of the six screws he said to remove

    Little Kobold - Contestar

  20. Dell Inspiron N4110 Motherboard Replacement: paso 20, imagen 1 de 1
    • Begin to separate the motherboard from the laptop

    • Pull up to separate from the other internal pieces, and then pull to the right away from the case

    When reinstalling motherboard, Insure the two connectors under back RH corner of MB are precisely aligned with the daughterboard below. If slightly misaligned, you will bend pins.

    Morris Stevens - Contestar

  21. Dell Inspiron N4110 Motherboard Replacement: paso 21, imagen 1 de 1
    • Remove the final cable from the motherboard

    • This will allow the motherboard to fully come out of the computer

    • When reinstalling motherboard, ensure the two connectors are precisely aligned with the daughterboard below. If slightly misaligned, you may bend the pins on the daughterboard connector.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Olivia

Miembro Desde 03/20/18

752 Reputación

3 Guías creadas

Equipo

2 comentarios

After pulling off the battery, the step to remove the four M2x3 mm screws was forgotten. Please update the guide.

apocalypse612 - Contestar

Hi my Friend, can you send me a picture in this zone, i need change a transistor smd to controller the battery charged.

The transistor is near to connector display

Sorry for my English, I'm a uruguayan thanks

Agustin - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 22

Todo El Tiempo: 2,509