Repara tus cosas Comunidad Tienda

Dell Inspiron E1705 Upper Case and Screen Replacement

Escrito Por: Evan Fairchild (y otros 6 participantes)
  • Comentarios: 0
  • Favoritos: 6
  • Terminaciones: 8

Dificultad

Moderado

Pasos

5

Tiempo Requerido

15 - 20 minutos

Secciones

1

Banderas

1

Better Introduction

Mejor introducción

Mejora esta guía completando o revisando su introducción.

Introducción

There is some disassembly required. You will want to prepare a clean and organized work space for this repair.

Herramientas

Partes

No se especificaron partes.

  1. Use a spudger to remove the six rubber nibs and 2 plastic pieces on the bezel of the display.

    • Use a spudger to remove the six rubber nibs and 2 plastic pieces on the bezel of the display.

    • Remove the eight Phillips #0 screws hidden under the rubber nibs and plastic pieces.

    Traducir

  2. Pry the plastic bezel from the back plate using a plastic opening tool. Remove the plastic bezel entirely and set it aside.

    • Pry the plastic bezel from the back plate using a plastic opening tool.

    • Remove the plastic bezel entirely and set it aside.

    Traducir

  4. Remove the 4 screws along the left and right sides of the screen. There are 8 screws in total. Remove the 4 screws along the left and right sides of the screen. There are 8 screws in total.

    • Remove the 4 screws along the left and right sides of the screen. There are 8 screws in total.

    Traducir

  5. Use the spudger to separate the screen from the back case. Hold the screen in one hand and tilt the back case away from you.

    • Use the spudger to separate the screen from the back case.

    • Hold the screen in one hand and tilt the back case away from you.

    • The screen is connected to the back case by two leads.

    Traducir

  6. Remove the two leads from the screen. They will stay connected to the computer. Do not touch the white tape on your replacement monitor.

    • Remove the two leads from the screen. They will stay connected to the computer.

    • Do not touch the white tape on your replacement monitor.

    • Remove the screen carefully.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

8 personas más completaron esta guía.

Autor

con 6 otros colaboradores

Evan Fairchild

Miembro Desde 05/10/10

601 Reputación

4 Guías creadas

Insignias: 13

+ 10 más insignias

Equipo

Cal Poly, Team 22-5, Maness Fall 2010 Miembro de Cal Poly, Team 22-5, Maness Fall 2010

CPSU-MANESS-F10S22G5

4 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 6,804