Introducción

This guide requires a Phillips #00 screwdriver

Partes

No se requieren partes.

Unplug the laptop from the power adapter and turn the power off.
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Agregar Comentario

Slide the battery-lock tab and hold.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Agregar Comentario

  • Undo the screw on the Mini-PCI card cover labeled "C"

  • This screw will remain within the panel

  • Remove the panel from the chassis.

Agregar Comentario

  • Disconnect the antenna cables from the Mini-PCI card.

Agregar Comentario

  • Use your fingertips to carefully spread apart the white plastic tabs.

  • Flip the Mini-PCI card up at a 45 degree angle.

  • Remove the card from the computer by sliding out diagonally

  • Ground yourself while dealing with the card. Static shock can cause damage to the card. Store the card in anti-static bag when not in use.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

charlierefvem

Miembro Desde 11/01/11

854 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 13-2, Forte Winter 2011 Miembro de Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 5

Todo El Tiempo: 3,979