Introducción

This guide requires a Phillips #00 screwdriver

Partes

No se requieren partes.

Unplug the laptop from the power adapter and turn the power off.
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Agregar Comentario

Slide the battery-lock tab and hold.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Agregar Comentario

  • Turn the laptop around.

Agregar Comentario

  • Use your fingers to gently pull up on the hinge covers. They will release with an audible snap.

  • Fold the screen back to 180 degrees.

  • Using your index fingers, pull up the hinge cover.

Agregar Comentario

  • After the hinges pop, pull the hinge cover gently.

  • Pull the clear tab on the right side of the laptop up. This tab will disconnect the hinge cover from the laptop.

Agregar Comentario

  • Remove the two 3mm screws on the top of the keyboard (nearest to the screen)

Agregar Comentario

  • Tilt the keyboard away from the screen.

  • Pull up on the white tab underneath the keyboard to release the keyboard.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ana

Miembro Desde 11/01/11

111 Reputación

1 Guía escrita

Equipo

Cal Poly, Team 13-2, Forte Winter 2011 Miembro de Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 4

Todo El Tiempo: 3,628