Introducción

This guide requires a Phillips #00 screwdriver

Partes

No se requieren partes.

  1. Unplug the laptop from the power adapter and turn the power off.
    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

    Agregar Comentario

  2. Slide the battery-lock tab and hold.
    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

    Agregar Comentario

    • Undo the two screws on the fan cover plate labeled "F3", they will remain in the panel.

    • These screws will remain in the panel

    • Lift up on the side of the fan nearest the screws to release the fan module

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

charlierefvem

Miembro Desde 11/01/11

854 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 13-2, Forte Winter 2011 Miembro de Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 0

Todo El Tiempo: 1,858