Saltar al contenido principal

Introducción

This guide requires a Phillips #00 screwdriver

Partes

No se especificaron partes.

  1. Unplug the laptop from the power adapter and turn the power off. Failure to unplug laptop before proceeding could result in risk of electric shock! Failure to unplug laptop before proceeding could result in risk of electric shock!
    • Unplug the laptop from the power adapter and turn the power off.

    • Failure to unplug laptop before proceeding could result in risk of electric shock!

  2. Slide the battery-lock tab and hold. Flip the battery away from the chassis to remove it. Flip the battery away from the chassis to remove it.
    • Slide the battery-lock tab and hold.

    • Flip the battery away from the chassis to remove it.

  3. Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now

    Kits de Reparación de Batería de iPhone

    Sólo $29.99

    Buy Now
  4. Undo the two screws on the fan cover labeled "F2" These screws will remain in the panel
    • Undo the two screws on the fan cover labeled "F2"

    • These screws will remain in the panel

    • Remove cover plate.

  5. Remove the single 6mm screw holding the fan in place.
    • Remove the single 6mm screw holding the fan in place.

  6. Flip the handle up. Use the handle to pull the fan away directly up, away from case.
    • Flip the handle up.

    • Use the handle to pull the fan away directly up, away from case.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

charlierefvem

Miembro Desde 11/01/11

854 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 13-2, Forte Winter 2011 Miembro de Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 2,096