Introducción

This guide requires a Phillips #00 screwdriver

Partes

No se requieren partes.

Unplug the laptop from the power adapter and turn the power off.
  • Unplug the laptop from the power adapter and turn the power off.

  • Failure to unplug laptop before proceeding could result in risk of electric shock!

Agregar Comentario

Slide the battery-lock tab and hold.
  • Slide the battery-lock tab and hold.

  • Flip the battery away from the chassis to remove it.

Agregar Comentario

  • Undo the two screws on the fan cover labeled "F2"

  • These screws will remain in the panel

  • Remove cover plate.

Agregar Comentario

  • Remove the single 6mm screw holding the fan in place.

Agregar Comentario

  • Flip the handle up.

  • Use the handle to pull the fan away directly up, away from case.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

charlierefvem

Miembro Desde 11/01/11

854 Reputación

7 Guías creadas

Equipo

Cal Poly, Team 13-2, Forte Winter 2011 Miembro de Cal Poly, Team 13-2, Forte Winter 2011

CPSU-FORTE-W11S13G2

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 2,076