Saltar al contenido principal

Dell Inspiron 8600 LCD Replacement

Qué necesitas

  1. Dell Inspiron 8600 LCD Replacement, Hinge Cover: paso 1, imagen 1 de 3 Dell Inspiron 8600 LCD Replacement, Hinge Cover: paso 1, imagen 2 de 3 Dell Inspiron 8600 LCD Replacement, Hinge Cover: paso 1, imagen 3 de 3
    • Insert a spudger into the notch at the far left side of the top blue panel and pry the hinge cover off.

    • You may need to pry the other side off as well. You can do this by inserting the spudger between the hinge and the top cover.

    • Be careful of the wire attached to the underside of the hinge cover.

  2. Dell Inspiron 8600 LCD Replacement: paso 2, imagen 1 de 1
    • Pull the small black tab on the right hand side of the laptop.

    • You have now removed the hinge cover.

  3. Dell Inspiron 8600 LCD Replacement, Display Module: paso 3, imagen 1 de 2 Dell Inspiron 8600 LCD Replacement, Display Module: paso 3, imagen 2 de 2
    • Flip the laptop over and remove the indicated screws.

    • Flip the laptop back over.

    • Find the two places where the display module is attached to the base of the computer.

  4. Dell Inspiron 8600 LCD Replacement: paso 4, imagen 1 de 1
    • Disconnect the video card from the display module by gently lifting upwards on the black tab.

  5. Dell Inspiron 8600 LCD Replacement: paso 5, imagen 1 de 2 Dell Inspiron 8600 LCD Replacement: paso 5, imagen 2 de 2
    • Lift the display module directly upwards from the base of the computer.

  6. Dell Inspiron 8600 LCD Replacement: paso 6, imagen 1 de 1
    • Now remove the display module.

  7. Dell Inspiron 8600 LCD Replacement, LCD: paso 7, imagen 1 de 3 Dell Inspiron 8600 LCD Replacement, LCD: paso 7, imagen 2 de 3 Dell Inspiron 8600 LCD Replacement, LCD: paso 7, imagen 3 de 3
    • First, remove the plastic tabs that are covering the interior screws.

    • After removing the tabs, remove the interior screws using a #1 Philips Screwdriver.

    • Note there are 8 tabs and 8 screws in total.

  8. Dell Inspiron 8600 LCD Replacement: paso 8, imagen 1 de 1
    • Now that the screws are removed, press the plastic casing inward to loosen the case. Then remove the plastic case from the monitor unit.

  9. Dell Inspiron 8600 LCD Replacement: paso 9, imagen 1 de 1
    • Using a Philips #1 screwdriver remove the screws holding the LCD in place.

    • Note there are 8 screws in total for this step, 4 on each side of the unit.

  10. Dell Inspiron 8600 LCD Replacement: paso 10, imagen 1 de 1
    • Remove the broken LCD unit, and replace with new unit.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Perry

Miembro Desde 04/12/11

251 Reputación

4 Guías creadas

Equipo

Cal Poly, Team 18-22, Garner Spring 2011 Miembro de Cal Poly, Team 18-22, Garner Spring 2011

CPSU-GARNER-S11S18G22

4 Miembros

16 Guías creadas

Un comentario

which controller board do i have to use for this model ?

bcdoor - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 4,633