Saltar al contenido principal

Introducción

Before removing the RAM you will need to remove your battery.

Partes

  1. Push in the tab on the battery and lift up. The battery should detach very easily. Push in the tab on the battery and lift up. The battery should detach very easily. Push in the tab on the battery and lift up. The battery should detach very easily.
    • Push in the tab on the battery and lift up. The battery should detach very easily.

  2. Skip the upgrade.

    Descuento de $10 en tu factura de $50 con
    SKIPANDSAVE10

    Save Now

    Skip the upgrade.

    Take $10 off $50 with
    SKIPANDSAVE10

    Save Now
  3. Remove the single screw securing the RAM compartment and pull up to reveal the RAM. Remove the single screw securing the RAM compartment and pull up to reveal the RAM. Remove the single screw securing the RAM compartment and pull up to reveal the RAM.
    • Remove the single screw securing the RAM compartment and pull up to reveal the RAM.

  4. Push on the small white metal tabs on both sides of a module to unlock it. The RAM should be stick out at approximately a 45 degree angle. Grasp the RAM by the sides and pull straight out to remove it. If the RAM sticks slightly, wiggle it back and forth gently to loosen it.
    • Push on the small white metal tabs on both sides of a module to unlock it.

    • The RAM should be stick out at approximately a 45 degree angle. Grasp the RAM by the sides and pull straight out to remove it.

    • If the RAM sticks slightly, wiggle it back and forth gently to loosen it.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Taylor Woods

Miembro Desde 05/04/11

104 Reputación

2 Guías creadas

Equipo

Cal Poly, Team 10-40, Forte Spring 2011 Miembro de Cal Poly, Team 10-40, Forte Spring 2011

CPSU-FORTE-S11S10G40

5 Miembros

8 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 2

Últimos 7 Días: 2

Últimos 30 Días: 2

Todo El Tiempo: 3,661