Introducción

You will be able to access wires connecting your screen and replace it if needed.

Partes

No se requieren partes.

Remove battery
  • Remove battery

  • Open screen so that it lies flat.

Agregar Comentario

Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it.
  • Starting from the right side of the hinge cover, use the flat end of the spudger to pry up the hinge cover and gently remove it.

Agregar Comentario

  • Remove the four M2 x 3-mm screws holding in the keyboard.

Agregar Comentario

  • Lift keyboard and detach the interface connector.

  • Take extra care when removing and handling the keyboard. The key caps on the keyboard are fragile, easily dislocate and would be time-consuming to replace.

Agregar Comentario

  • Remove two screws (5.8mm) located at the rear of the laptop.

Agregar Comentario

  • Detach screen connector.

Agregar Comentario

  • Remove four screws (5.8 mm) located at hinges of the screen.

Agregar Comentario

  • Lift and remove display screen.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

May Chauvin

Miembro Desde 14/04/11

186 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 12-34, Maness Spring 2011 Miembro de Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 3

Últimos 30 Días: 22

Todo El Tiempo: 2,730