Introducción

You would need to be removing the keyboard to access the heatsink and fan. If you need to, add a new layer of Arctic Silver Thermal Paste.

Partes

No se requieren partes.

  1. Remove battery
    • Remove battery

    • Open screen so that it lies flat.

  2. Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it. Starting from the right side of the hinge cover,  use the flat end of the spudger to pry up the hinge cover and gently remove it.
    • Starting from the right side of the hinge cover, use the flat end of the spudger to pry up the hinge cover and gently remove it.

  3. Remove the four M2 x 3-mm screws holding in the keyboard. Remove the four M2 x 3-mm screws holding in the keyboard.
    • Remove the four M2 x 3-mm screws holding in the keyboard.

  4. Lift keyboard and detach the interface connector.
    • Lift keyboard and detach the interface connector.

    • Take extra care when removing and handling the keyboard. The key caps on the keyboard are fragile, easily dislocate and would be time-consuming to replace.

  5. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda

    ¿Alguna vez arreglaste algo? Eso es genial.

    Comparte tu historia de reparación con #SoyUnGenio

    Todos somos Genios

    Comparte tu historia de reparación con #SoyUnGenio

  6. Detach screen connector Detach screen connector
    • Detach screen connector

  7. Remove two screws (5.8mm) located behind the screen. Remove two screws (5.8mm) located behind the screen.
    • Remove two screws (5.8mm) located behind the screen.

  8. Remove one screw (8.6 mm) on metal plating. Remove the metal plating
    • Remove one screw (8.6 mm) on metal plating.

    • Remove the metal plating

  9. Loosen four screws. These screws are attached to the heat sink and cannot be completely removed.
    • Loosen four screws.

    • These screws are attached to the heat sink and cannot be completely removed.

  10. Disconnect the wire connecting the heatsink to the motherboard. Disconnect the wire connecting the heatsink to the motherboard.
    • Disconnect the wire connecting the heatsink to the motherboard.

  11. Slide the heatsink away from the screen and lift.
    • Slide the heatsink away from the screen and lift.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

May Chauvin

Miembro Desde 14/04/11

186 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 12-34, Maness Spring 2011 Miembro de Cal Poly, Team 12-34, Maness Spring 2011

CPSU-MANESS-S11S12G34

4 Miembros

6 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 10

Todo El Tiempo: 3,041