Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Localiza el interruptor de liberación de la batería en la parte inferior del portátil.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove/loosen the eight 4.80 mm Phillips #1 screws securing the bottom panel.
-
The screws may only need to be loosened, as they are generally retained by plastic washers.
-
Remove the bottom panel.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Loosen the five #1 Phillips screws securing the heat sink and clean it with compressed air
-
Gently lift the heat sink from side indicated in the picture.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a small flathead screwdriver to turn the ZIF-socket cam screw counterclockwise until it can't be turned anymore.
-
Lift the CPU out of its socket, being careful not to bend its pins.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.