Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the laptop upside down on a flat, stable surface.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 3mm screw in the location shown, using a Phillips #1 screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the panel from the sides and pull it out at an angle towards you.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the five 3mm screws on the battery with a Torx (T8) screwdriver in the locations shown.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the power cord from the battery by using a pair of tweezers, your fingers, or the opening tools from the iFixit pro tech tool kit.
-
Pinch the clips on the left and right side while pulling on the cord at the same time.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the battery towards you.
-
Make sure to pull at an upward angle.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 3mm screw using the Phillips #0 screwdriver in the location shown.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Detach the black and white wires connected to the card by gently lifting up on the wires.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pull the wireless card out at an angle towards you.
-