Introducción

This guide will walk you through how to remove the power port in your Dell Inspiron 15-7548.

Partes

No se requieren partes.

  1. Unscrew the six  2.5x6mm screws and remove them using a Phillips #1 screwdriver.
    • Unscrew the six 2.5x6mm screws and remove them using a Phillips #1 screwdriver.

    • Loosen the four 2x3mm captive screws at the bottom.

    • The four screws on the bottom are captive screws and cannot be removed.

  2. Using the flat head side of the spudger separate the the back panel from the rest of the laptop.
    • Using the flat head side of the spudger separate the the back panel from the rest of the laptop.

    • When separating the bottom and right side of the case do not insert the spudger more than half an inch.

    • Grab the wires and lightly pull to remove the power port from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 21

Todo El Tiempo: 46