Introducción

The guide shows the process of removing the RAM from the Dell Insprion 15-7547.

Partes

No se requieren partes.

  1. Close the display and flip the laptop on its back.
    • Close the display and flip the laptop on its back.

    • Loosen the ten 5.0 mm-long Phillips #0 screws.

    • The four screws marked with orange will remain captive to the cover.

  2. Pry the cover open with a plastic spudger   and remove it.
    • Pry the cover open with a plastic spudger and remove it.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the plastic heat spreader that covers the RAM sticks. Remove the plastic heat spreader that covers the RAM sticks. Remove the plastic heat spreader that covers the RAM sticks.
    • Remove the plastic heat spreader that covers the RAM sticks.

  5. Release the clamps on each side of the RAM sticks by pushing away from the center. When done properly the RAM stick should pop up.
    • Release the clamps on each side of the RAM sticks by pushing away from the center.

    • When done properly the RAM stick should pop up.

  6. Pull the RAM stick in a straight line out of the socket. Pull the RAM stick in a straight line out of the socket.
    • Pull the RAM stick in a straight line out of the socket.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 3

Últimos 30 Días: 3

Todo El Tiempo: 66