Introducción

The guide shows the process of disconnecting the Dell Inspiron 15-7547's hard drive.

Partes

No se requieren partes.

  1. Close the display and flip the laptop on its back.
    • Close the display and flip the laptop on its back.

    • Loosen the ten 5.0 mm-long Phillips #0 screws.

    • The four screws marked with orange will remain captive to the cover.

  2. Pry the cover open with a plastic spudger   and remove it.
    • Pry the cover open with a plastic spudger and remove it.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Remove the four 5.0 mm-long Philips #0 screws connecting the hard drive to the chassis. Remove the four 5.0 mm-long Philips #0 screws connecting the hard drive to the chassis.
    • Remove the four 5.0 mm-long Philips #0 screws connecting the hard drive to the chassis.

  5. Disconnect the hard drive from the motherboard by placing your fingers at the back, and pulling forward towards the front of the chassis. Disconnect the hard drive from the motherboard by placing your fingers at the back, and pulling forward towards the front of the chassis.
    • Disconnect the hard drive from the motherboard by placing your fingers at the back, and pulling forward towards the front of the chassis.

  6. Lift the hard drive out of the chassis.
    • Lift the hard drive out of the chassis.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 4

Todo El Tiempo: 87