Saltar al contenido principal

Introducción

This guide will be helpful for those who want to replace their hard drive.

Partes

No se especificaron partes.

  1. Make sure the computer is unplugged and turned off before you start this procedure. Look on the bottom of the computer. Locate the 2 screws. (Picture 1) Using the Phillips 00 Screwdriver, unscrew both screws, and remove the bottom cover. The bottom cover can be hard to pull off, so you may need to pry it off with a pry tool.
    • Make sure the computer is unplugged and turned off before you start this procedure.

    • Look on the bottom of the computer. Locate the 2 screws. (Picture 1)

    • Using the Phillips 00 Screwdriver, unscrew both screws, and remove the bottom cover. The bottom cover can be hard to pull off, so you may need to pry it off with a pry tool.

  2. Remove the 4 - M2.5 x 5mm screws. Using the tab, lift the Hard Drive out of the laptop. (picture 3) Using the tab, lift the Hard Drive out of the laptop. (picture 3)
    • Remove the 4 - M2.5 x 5mm screws.

    • Using the tab, lift the Hard Drive out of the laptop. (picture 3)

  3. After lifting the Hard Drive, unplug the Hard Drive connector. Now the hard drive is ready to be replaced.
    • After lifting the Hard Drive, unplug the Hard Drive connector.

    • Now the hard drive is ready to be replaced.

Conclusión

To reassemble your device, follow these instructions in reverse order.

5 personas más completaron esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 11

Ultimos 30 días: 72

Todo El Tiempo: 2,326