Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

How to remove and replace the Hard-Drive.

Partes

No se especificaron partes.

  1. Remove the screws that secure the hard-drive assembly to the computer base.
    • Remove the screws that secure the hard-drive assembly to the computer base.

  2. Open the latch and disconnect the hard-drive cable from the system board.
    • Open the latch and disconnect the hard-drive cable from the system board.

  3. Lift the hard-drive assembly off the computer base.
    • Lift the hard-drive assembly off the computer base.

  4. Remove the screws that secure the hard-drive bracket to the hard drive.
    • Remove the screws that secure the hard-drive bracket to the hard drive.

  5. ABRIR TODAS LAS PESTAÑAS

    Kits de actualización de RAM para Mac

    Compra kits

    Suficiente RAM
    para todas las pestañas

    Compra kits
  6. Lift the hard-drive bracket off the hard drive.
    • Lift the hard-drive bracket off the hard drive.

  7. Disconnect the interposer from the hard drive.
    • Disconnect the interposer from the hard drive.

  8. Connect the interposer to the NEW hard drive.
    • Connect the interposer to the NEW hard drive.

  9. Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.
    • Align the screw holes on the hard-drive bracket with the screw holes on the hard drive.

  10. Replace the screws that secure the hard-drive bracket to the hard drive.
    • Replace the screws that secure the hard-drive bracket to the hard drive.

  11. Align the screw holes on the hard-drive assembly with the screw holes on the computer base.
    • Align the screw holes on the hard-drive assembly with the screw holes on the computer base.

  12. Replace the screws that secure the hard-drive assembly to the computer base.
    • Replace the screws that secure the hard-drive assembly to the computer base.

  13. Slide the hard-drive cable into the system board and close the latch to secure the cable.
    • Slide the hard-drive cable into the system board and close the latch to secure the cable.

Linea de Meta

Una persona más ha completado esta guía.

darrius

Miembro Desde 26/03/18

5,072 Reputación

30 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

21 Miembros

1,824 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 1

Todo El Tiempo: 58