Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.
Introducción
If you notice your computer overheating and it is not because of the fan, this guide may be able to help. This guide will show you how to replace the heat sink in a few steps.
Qué necesitas
-
-
Close the computer display and turn the computer over so that the base of the computer is facing up.
-
-
-
Remove the ten screws that secure the base cover to the base of the computer.
-
-
-
Using a plastic scribe (plastic opening tool), pry the base cover off of the base of the computer.
-
-
-
-
Unplug the daughterboard cable in two places, then remove the daughterboard.
-
Unplug the fan cable.
-
-
-
Remove 3 M2 2mm screws, using the Phillips 0 screwdriver, on the heat sink.
-
Remove the heat sink.
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.