Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
-
Quite los tornillos que aseguran la cubierta de la base a la base de la computadora.
-
-
-
Usando un spudger de plástico (herramienta de apertura de plástico), saca la cubierta de la base de la computadora.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the two M2 3mm screws attaching the battery using the Phillips #1 screwdriver.
-
Remove the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pry open the two clips.
-
Gently lift the RAM stick and pull it out of the motherboard.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unplug the daughterboard cable in two places, then remove the daughterboard.
-
Unplug the fan cable.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove two 3mm screws from the cooling fan using the Phillips #1 screwdriver.
-
Remove the cooling fan from the laptop.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.