Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #0 screwdriver to remove the three 3 mm screws holding the battery in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Disconnect the cable connecting the battery to the motherboard, and then remove the battery
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a Phillips #0 screwdriver to remove the 3mm screw and the metal bracket that holds the network adapter card in place.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull out the network card.
-
To completely remove the network card, disconnect the two cords (white and black) from the adapter card. White on 1 and Black on 2.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.