Introducción

Is your computer experiencing trouble with connecting to the internet? Consider using this guide to replace the network adapter card in your laptop.

Partes

No se requieren partes.

  1. Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.
    • Use a Phillips #0 screwdriver to remove the 9.6 mm screws securing the back plate of the laptop.

  2. Use a prying tool to remove the back plate.
    • Use a prying tool to remove the back plate.

  3. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Use a Phillips #0 screwdriver to remove the three 3 mm screws holding the battery in place.
    • Use a Phillips #0 screwdriver to remove the three 3 mm screws holding the battery in place.

  5. Disconnect the cable connecting the battery to the motherboard, and then remove the battery
    • Disconnect the cable connecting the battery to the motherboard, and then remove the battery

  6. Use a Phillips #0 screwdriver to remove the 3mm screw and the metal bracket that holds the network adapter card in place.
    • Use a Phillips #0 screwdriver to remove the 3mm screw and the metal bracket that holds the network adapter card in place.

  7. Pull out the network card. To completely remove the network card, disconnect the two cords (white and black) from the adapter card. White on 1 and Black on 2.
    • Pull out the network card.

    • To completely remove the network card, disconnect the two cords (white and black) from the adapter card. White on 1 and Black on 2.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Raj Dhavalikar

Miembro Desde 10/11/18

133 Reputación

1 Guía escrita

Equipo

IUPUI, Team S4-G4, Wilson Fall 2018 Miembro de IUPUI, Team S4-G4, Wilson Fall 2018

IUPUI-WILSON-F18S4G4

4 Miembros

2 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 4

Todo El Tiempo: 69