Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Introducción

In this guide, we will show you how to remove and replace the Battery.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. Disconnect the battery cable from the system board.
  2. Remove the screws that secure the battery to the palm-rest assembly.
    • Remove the screws that secure the battery to the palm-rest assembly.

  3. Lift the battery off the palm-rest assembly.
    • Lift the battery off the palm-rest assembly.

    • Press and hold the power button for five seconds to ground the system board.

  4. Align the screw holes on the NEW battery with the screw holes on the palm-rest assembly.
    • Align the screw holes on the NEW battery with the screw holes on the palm-rest assembly.

  5. Replace the screws that secure the battery to the palm-rest assembly.
    • Replace the screws that secure the battery to the palm-rest assembly.

  6. Connect the battery cable to the system board.
    • Connect the battery cable to the system board.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Terrence15

Miembro Desde 18/12/17

72,456 Reputación

442 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

21 Miembros

1,824 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 14

Ultimos 30 días: 94

Todo El Tiempo: 2,344