Saltar al contenido principal

Introducción

In this guide, we will show you how to remove and replace the Hard Drive.

Partes

No se especificaron partes.

  1. WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.
    • WARNING: Before working inside your computer, read the safety information that shipped with your computer. Follow the procedures in Before You Begin.

    • Remove the three screws that secure the hard drive assembly to the computer base.

  2. Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.
    • Pull the pull-tab on the hard drive bracket towards the right to disconnect the hard drive assembly from the interposer.

  3. Pull the pull-tab on the hard drive bracket to lift the hard drive assembly at an angle and out of the hard drive compartment as shown in the illustration.
    • Pull the pull-tab on the hard drive bracket to lift the hard drive assembly at an angle and out of the hard drive compartment as shown in the illustration.

  4. Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now

    Kits de Reparación de Batería de MacBook Air

    A partir de $69.99

    Buy Now
  5. Remove the four screws that secure the hard drive bracket to the hard drive and remove the hard drive bracket.
    • Remove the four screws that secure the hard drive bracket to the hard drive and remove the hard drive bracket.

  6. Replace the hard drive bracket and the four screws that secure the NEW hard drive bracket to the hard drive.
    • Replace the hard drive bracket and the four screws that secure the NEW hard drive bracket to the hard drive.

  7. Place the hard drive assembly in the hard drive compartment.
    • Place the hard drive assembly in the hard drive compartment.

  8. Push the hard drive assembly towards the left until it is fully connected to the interposer.
    • Push the hard drive assembly towards the left until it is fully connected to the interposer.

  9. Replace the three screws that secure the hard drive assembly to the computer base.
    • Replace the three screws that secure the hard drive assembly to the computer base.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Terrence15

Miembro Desde 18/12/17

70,815 Reputación

442 Guías creadas

Equipo

Informative Technologies Inc. Miembro de Informative Technologies Inc.

Community

15 Miembros

925 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 15

Todo El Tiempo: 122