1. Close the computer and turn it over, with the bottom of the computer facing up.
    • Close the computer and turn it over, with the bottom of the computer facing up.

  2. Remove the nine 7.6mm PH0 screws on the cover.
    • Remove the nine 7.6mm PH0 screws on the cover.

    • Use a plastic opening tool to remove the cover from the computer.

    • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

    • Remove the hard drive cable from the battery.

    • Lift the battery from the keyboard.

    • Disconnect fan cable with tweezers.

    • Use a screwdriver to remove the two 2.3mm PH00 screws on the processor fan.

    • Use a PH0 screwdriver to loosen the 4 captured screws on the heat sink assembly.

    • Remove the processor fan and heat sink assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Muhammad Erchid

Miembro Desde 09/10/18

1,051 Reputación

5 Guías creadas

Equipo

USF Tampa, Team S1-G6, Leahy Fall 2018 Miembro de USF Tampa, Team S1-G6, Leahy Fall 2018

USFT-LEAHY-F18S1G6

3 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 15

Últimos 30 Días: 25

Todo El Tiempo: 36