Saltar al contenido principal
  1. Close the computer and turn it over, with the bottom of the computer facing up.
    • Close the computer and turn it over, with the bottom of the computer facing up.

  2. Remove the nine 7.6mm PH0 screws on the cover.
    • Remove the nine 7.6mm PH0 screws on the cover.

  3. Use a plastic opening tool to remove the cover from the computer.
    • Use a plastic opening tool to remove the cover from the computer.

  4. Remove the three 4.7mm PH0 screws that secure the battery to the computer.
    • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

  5. Remove the hard drive cable from the battery.
    • Remove the hard drive cable from the battery.

  6. Lift the battery from the keyboard.
    • Lift the battery from the keyboard.

  7. Disconnect power and volume buttons board cable from the system board.
    • Disconnect power and volume buttons board cable from the system board.

  8. Remove the power and volume buttons board cable from the routing guides on the speaker.
    • Remove the power and volume buttons board cable from the routing guides on the speaker.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Muhammad Erchid

Miembro Desde 09/10/18

1,051 Reputación

5 Guías creadas

Equipo

USF Tampa, Team S1-G6, Leahy Fall 2018 Miembro de USF Tampa, Team S1-G6, Leahy Fall 2018

USFT-LEAHY-F18S1G6

3 Miembros

5 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 5

Todo El Tiempo: 66