Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Close the computer and turn it over, with the bottom of the computer facing up.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to remove the cover from the computer.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the three 4.7mm PH0 screws that secure the battery to the computer.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove 2 4mm PH0 screws that connect display cable bracket to the system board.
-
Lift display cable bracket off the system board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the pull tab to disconnect the display cable from the system board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the windows button board cable from the system board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to take the display panel assembly off the display back cover and antenna assembly. Start from the top.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a plastic opening tool to take the camera module off the display.
-