1. Close the computer and turn it over, with the bottom of the computer facing up.
    • Close the computer and turn it over, with the bottom of the computer facing up.

  2. Remove the nine 7.6mm PH0 screws on the cover.
    • Remove the nine 7.6mm PH0 screws on the cover.

    • Use a plastic opening tool to remove the cover from the computer.

    • Remove the three 4.7mm PH0 screws that secure the battery to the computer.

    • Remove the hard drive cable from the battery.

    • Lift the battery from the keyboard.

    • Disconnect antenna cables.

    • Remove 2 4mm PH0 screws that connect display cable bracket to the system board.

    • Lift display cable bracket off the system board.

    • Use the pull tab to disconnect the display cable from the system board.

    • Pull the windows button board cable from the system board.

    • Remove the 2 5.6mm PH0 screws.

    • Separate the screen and body of the computer.

    • Use a plastic opening tool to take the display panel assembly off the display back cover and antenna assembly. Start from the top.

    • Place display panel face down on a flat surface

    • Use a plastic opening tool to take the camera module off the display.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Muhammad Erchid

Miembro Desde 09/10/18

1,051 Reputación

5 Guías creadas

Equipo

USF Tampa, Team S1-G6, Leahy Fall 2018 Miembro de USF Tampa, Team S1-G6, Leahy Fall 2018

USFT-LEAHY-F18S1G6

3 Miembros

5 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 2

Últimos 30 Días: 36

Todo El Tiempo: 50