Introducción

Use this guide to replace the RAM in your Dell Dimension 4600.

Herramientas

No se requieren herramientas.

Partes

Locate the case cover latch on the back of the computer.
  • Locate the case cover latch on the back of the computer.

Agregar Comentario

Using your index finger, slide and hold the cover latch down.
  • Using your index finger, slide and hold the cover latch down.

  • While holding the latch down, place your other hand flat on the side of the case and firmly shift the side panel to the left until it disengages.

Agregar Comentario

  • Grab the edge of the panel and slide it away from the case until it is removed.

Agregar Comentario

  • Lay the computer flat on its side so that you are looking down on all of the components.

  • Locate the RAM modules on the motherboard.

Agregar Comentario

  • Locate the white or black tabs holding the RAM module in place.

  • Place your index finger on the tab and firmly press down. The tab should release and the RAM module should be slightly raised.

  • Repeat this for the tab on the other side of the RAM module.

  • Repeat this step for each RAM module.

Agregar Comentario

  • Grasp the RAM module and firmly pull upwards until it is released from its slot.

  • Repeat this step for each RAM module.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

12 personas más completaron esta guía.

Equipo

Cal Poly, Team 6-10, Regan Fall 2011 Miembro de Cal Poly, Team 6-10, Regan Fall 2011

CPSU-REGAN-F11S6G10

4 Miembros

6 Guías creadas

Would be great if the DIMM slots were explained (numbering) as to which are populated for dual channel, etc.

MJfromMD - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 4

Últimos 30 Días: 13

Todo El Tiempo: 9,153